DROP-ON GLASS 25KG

Code:  TMM003-25 Glass bead can be applied to thermoplastic markings during the installation process to add extra slip-resistance. You may find while burning the markings on to the ground that the pre-applied glass grit sinks through the thermoplastic. Adding extra glass bead while the marking is still soft ensures a good covering on top of…

Primer 5kg

Code: TMM002-5 Primer is used to prepare the ground for the installation of thermoplastic markings. Once the ground is dry and swept, it is strongly recommended that primer is applied to ensure the best contact between the plastic and the ground avoiding any problems with the markings peeling in the future.